Description
Product Description
Why use Gtechniq EXO?
Using composite siloxane technology, EXOv5 makes water spots and road grime easy to remove, offers excellent resistance to all wash chemicals and can help withstand micro-marring. It produces a high-gloss, warm-looking, extremely hydrophobic finish.
It has a consistent film that is more durable and resistant to road salt and washes chemicals than its predecessors. Application has been improved with just a single layer of product required, with a slow flash-off time, giving more time to achieve a perfect finish.
All of the above combined with the introduction of a good degree of swirl resistance means EXOv5 represents a significant leap forward in Last Surface Protection (LSP) technology.
Application Information
Simple steps to help you get the best results
- EXOv5 can be applied as a standalone coating or as a top layer for Gtechniq C1 Crystal Lacquer or Gtechniq Crystal Serum Light (CSL) – we recommend applying C1 or CSL as a base coat for easy-to-mark and dark paints
- If you are applying over C1, EXOv5 should be applied a minimum of 4 hours, but less than 12 hours, after you finish the C1 application
- If you are applying over CSL, EXOv5 should be applied at least 1 hour after application of the CSL.
- Ensure that your vehicle is out of direct sunlight but warmer than 5 degrees Celsius, is completely dry and will stay dry for at least 12 hours after application
- Wipe down all surfaces using Gtechniq Panel Wipe and a Gtechniq MF1 ZeroR Microfibre Buff Cloth (apply the Panel Wipe directly to the cloth and not directly to the panel) – if you are applying over newly applied C1 or CSL, this step is not required
- Shake the bottle well and wear gloves
- Prime the AP2 Ultra Soft Foam Filled Applicator evenly with a good amount of product so that the pad is saturated
- Apply with the applicator provided in overlapping strokes to an area roughly 2ft by 2ft (60cm x 60cm). Wait for 1 to 2 minutes after applying to a panel and buff with an MF1, followed by a second MF1 to remove any smearing, leaving the surface slick. Just a single layer of product is required.
- Allow the coating to cure for at least 12 hours before exposure to moisture
- After application, we recommend that you do not wash the car for at least 7 days
- Store in a cool, dry place
- If opened, use within 3 months, if unopened, use within 12 months
Need Help?
Frequently Asked Questions
What is ceramic coating?
Ceramic coating is a liquid that chemically bonds to your car’s paint, creating a durable, protective layer. EXOv5 offers exceptional hydrophobic performance, enhancing gloss while helping repel water, dirt, and contaminants.
Is ceramic coating worth it?
Yes—especially for those who want long-term protection and easier maintenance. EXOv5 makes washing your car quicker and helps prevent issues like water spots, oxidation, and staining from road grime.
How long does a ceramic coating last?
The lifespan of a ceramic coating varies by product and care routine. EXOv5 typically lasts up to 2 years, maintaining slickness, water-beading, and chemical resistance with regular upkeep.
How to apply a ceramic coating like EXOv5?
Apply to clean, decontaminated paintwork in a cool, dry environment. Using an applicator pad, spread a thin, even layer and allow it to cure. Then gently buff off the residue with a clean microfibre towel. Always follow Gtechniq’s application instructions for best results.
Is ceramic coating safe for all paint types?
Yes—EXOv5 is safe for all modern automotive finishes, including gloss, matt, and vinyl wraps. It bonds at a molecular level to enhance protection without altering the appearance of specialty finishes.
How much does ceramic coating cost?
Professional application can range from £800 – £1,500+, depending on prep work and vehicle size. However, EXOv5 is also DIY-friendly, offering high-end performance at a lower cost when applied correctly at home.
Can I apply ceramic coating myself?
Yes—EXOv5 is designed to be accessible for experienced enthusiasts as well as professionals. Proper preparation and patience are key, but the DIY application process is straightforward with the right tools and environment.
How to remove ceramic coating?
Over time, ceramic coatings naturally degrade. If removal is needed sooner, machine polishing is the most effective method. Always assess the surface carefully before reapplying EXOv5 or any other coating.
What does hydrophobic coating actually do?
Hydrophobic coatings like EXOv5 repel water and contaminants, making your car easier to clean and helping prevent water spotting, staining, and grime build-up. The slick finish also enhances gloss and depth of colour.
excellent product